Cisco Catalyst 6800 Series
Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.
Weight: 8.24 lb (3.74 kg)
Operating temperature: Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C)
Operating altitude: Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)
Humidity (RH) ambient (noncondensing): 10 to 90 percent
Старая цена: 31287
Файлы: https://www.router-switch.com/media/upload/product-pdf/cisco-new-switch-selection-decision-2018.pdf, https://www.router-switch.com/media/upload/product-pdf/cisco-catalyst-4500-6500-6800-series-transition-guide.pdf, https://www.router-switch.com/cisco-c6800-48p-t-datasheet-pdf.html
C6800-48P-TX is Cisco Catalyst 6800 48-port 1GE copper module with integrated DFC4. This C6800-48P-TX is similar with the C6800-48P-TX=. The C6800-48P-TX= is a spare one.
Quick Specs
Figure 1 shows the appearance of C6800-48P-TX.
Table 1 shows the Quick Specs.
|
Product Code |
C6800-48P-TX |
|
Product Type |
6800 Series 1 Gigabit Modules |
|
Transceiver Type |
RJ-45 |
|
Ports/Interface/ |
48-port, RJ-45, 100m, Category 5 cable |
|
Port Density/ |
·240 ports/ C6807-XL ·528 ports/ 6513E ·384 ports/ 6509E |
|
Maximum Frame?Size |
Up to 9216 bytes/frame |
|
Fabric channel speed |
20 Gb/sec |
|
Pluggable transceivers |
Not supported |
|
TDR support |
Supported |
|
Buffer Size per Port |
·Rx-166KB ·Tx-1.17MB |
|
Onboard Memory |
1GB Default |
|
Power Requirements |
405 and 410 Watts respectively |
|
Backplane connection |
Connects to the switch fabric using dual full-duplex 20-Gbps switch fabric channels (40 Gbps total). |
|
Chassis/slot support |
Can occupy slots 1-2 and 5-7 in C6807-XL chassis. Can occupy any slots in |
|
Supervisor engine |
Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL. |
|
Distributed forwarding and performance |
?Comes equipped with DFC4 or DFC4XL daughter cards, delivering optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding. |
|
Backplane connection |
Connects to the switch fabric using dual full-duplex 20-Gbps switch fabric channels (40 Gbps total). |
|
Chassis/slot support |
Can occupy slots 1-2 and 5-7 in C6807-XL chassis. Can occupy any slots in |
|
Supervisor engine |
Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL. |
|
Distributed forwarding and performance |
?Comes equipped with DFC4 or DFC4XL daughter cards, delivering optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding. |
|
Dimensions (H x W x D) |
1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis. |
|
Weight |
8.24 lb (3.74 kg) |
Product Details
Figure 2 shows the front panel of C6800-48P-TX.
Note:
|
_ |
Odd numbered ports |
|
_ |
Even numbered ports |
Compare to Similar Items
Table 2 shows the comparison of C6800-48P-TX and C6800-48P-SFP-XL.
|
Product Code |
C6800-48P-TX |
|
|
Description |
48-port Copper Gigabit Ethernet Module with DFC4 |
48-port SFP fiber Gigabit Ethernet Module with DFC4XL? |
|
Ports/Interface/ |
48-port, RJ-45, 100m, Category 5 cable |
48 port; 1000BASE-SX, LX/LH, -ZX, -T; 1000BASE-CWDM; LC?connecter |
|
Maximum Frame?Size |
Up to 9216 bytes/frame |
Up to 9216 bytes/frame |
|
Queues per Port (Tx = Transmit, Rx = Receive) |
·Tx-1p3q8T ·Rx-2q8T |
·Tx-1p3q8t; Rx2q8t |
|
Buffer Size per Port |
·Rx-166KB ·Tx-1.17MB |
?·Rx-166KB ·Tx-1.17MB |
|
Power Requirements |
405 and 410 Watts respectively |
334.44 and 339.44 Watts respectively |
|
Supervisor engine |
Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL. |
Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL. |
Get More Information
Do you have any question about the Cisco C6800-48P-TX
Contact us now via Live Chat or [email protected].