Huawei CloudEngine 12800 Data Center Switches
QoS: Traffic classification based on Layer 2, Layer 3, Layer 4, and priority information
IPv6: IPv6 over VXLAN
Reliability: Link Aggregation Control Protocol (LACP)
Multicast: IGMP, PIM-SM, PIM-DM, MSDP, and MBGP
MPLS: Basic MPLS functions
Programmability: OpenFlow
VLAN: Adding access, trunk, and hybrid interfaces to VLANs
Service Slots: 8
Operating Voltage: AC: 90V to 290V DC: -38.4V to -72V HVDC: 240V
Traffic Analysis: NetStream
IP Routing: IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP
MAC Address: Dynamic learning and aging of MAC addresses
Dimensions (W x D x H, mm): 442 x 620 x 708.4 (16U)
Configuration and Maintenance: Console, Telnet, and SSH terminals
Security and Management: 802.1x authentication
Chassis Weight (empty): < 100 kg (220 lb)
Airflow Design: Strict front-to-back
Device Virtualization: Virtual System (VS)
Network Virtualization: M-LAG
VM Awareness: Agile Controller
Network Convergence: FCoE
Switching Capacity (Tbit/s): 89/ 516
Forwarding Rate (Mpps): 34,560
Switching Fabric Module Slots: 4
Fabric Architecture: Clos architecture, cell switching, VoQ, and distributed large buffer
Data Center Interconnect: BGP-EVPN
O&M: IEEE 1588v2
Max. Power Supply: 12,000W
Файлы: https://www.router-switch.com/huawei-ce12808sa-bb-datasheet-pdf.html
CE12808SA-BB is CE12808S Bundle B (Assembly Chassis, 2*MPUA-S, 4*SFUC-S, 2*PHD-3000WA, 2*CE-L24LQ-EC1,OS).
Quick Specs
Figure 1 shows the appearance of CE12808SA-BB.
Table 1 shows the Quick Specs.
|
Product Code |
CE12808SA-BB |
|
Switching Capacity |
89/ |
|
Forwarding Rate |
34,560 |
|
Service Slots |
8 |
|
Switching Fabric |
4 |
|
LPU slots |
8 (slot IDs: 01 to 08) |
|
MPU slots |
2 (slot IDs: 09 to 10) |
|
CMU slots |
None (monitoring function integrated on the MPU) |
|
SFU slots |
4 (slot IDs: 11 to 14) |
|
Power slots |
8 (slot IDs: PM1 to PM8) |
|
Fan slots |
6 (slot IDs: FAN1 to FAN6) |
Product Details
Figure 2 shows the front panel of CE12808SA-BB.
Note:
|
_ |
CE12800 series switches chassis header, showing the following:
|
|
_ |
Two MPUs |
|
_ |
LPU |
|
_ |
SFU |
|
_ |
Front ESD jack |
|
_ |
Power modules |
|
_ |
Cable management frame |
|
_ |
Two power switches |
* In the CE12808S series switches, MPUs, SFUs, and LPUs are all horizontally installed in the chassis.
* CE12808SA-BB is CE12808S Bundle B (Assembly Chassis, 2*MPUA-S, 4*SFUC-S, 2*PHD-3000WA, 2*CE-L24LQ-EC1,OS), the other modules or cards must be purchased separately.
Figure 3 shows the back panel of CE12808SA-BB.
Note:
|
_ |
Rear ESD jack |
|
_ |
Handle |
|
_ |
Fan modules |
|
_ |
Two ground points for a dual-hole ground lug, with a yellow grounding label attached |
|
_ |
Power distribution unit |
* In the CE12808S series switches, MPUs, SFUs, and LPUs are all horizontally installed in the chassis.
* CE12808SA-BB is CE12808S Bundle B (Assembly Chassis, 2*MPUA-S, 4*SFUC-S, 2*PHD-3000WA, 2*CE-L24LQ-EC1,OS), the other modules or cards must be purchased separately.
The Modules, Cards
Table 2 shows the recommended elements for the CE12808SA-BB.
|
Model |
Description |
|
AC&high-voltage DC power module |
|
|
3000W HVDC Power Module |
|
|
DC power module |
|
|
2200W DC Power Supply |
|
|
FE-SFP optical transceiver |
|
|
Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC) |
|
|
Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC) |
|
|
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC) |
|
|
GE-SFP optical transceiver |
|
|
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
|
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
|
10G-SFP+ optical transceiver |
|
|
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
|
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
|
40GE CFP optical transceiver |
|
|
High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,10km,stright LC) |
|
|
High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,40km,stright LC) |
|
|
40GE QSFP+ optical transceiver |
|
|
40GBase-eSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.3km,MPO)(Connect to four SFP+ Optical Transceiver) |
|
|
40GBase-ER4 Optical Transceiver,QSFP+,40G,Single-mode Module (1310nm,40km,LC) |
|
|
100GE CFP optical transceiver |
|
|
High Speed Transceiver,CFP,100G,Multimode Module(850nm,10*10G,0.1km,MPO) |
|
|
CFP, 100G, Single-mode Module(1310nm band,4*25G,10km,stright LC) |
|
|
High Speed Transceiver,CFP,100G,Single-mode Module(1310nm band,4*25G,40km,stright LC) |
|
|
GE copper transceiver |
|
|
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
|
100GE interface card |
|
|
12-Port-100GE Interface Card(EG,CFP2) |
|
|
8-Port-100G Interface Card(EC,CXP) |
|
|
10GE interface card |
|
|
Huawei 48-port 100M/1000M/10G Base-T Interface Card(EC,RJ45) CE-L48XT-EC |
|
|
48-Port-10GE Interface Card(EC,SFP+) |
|
|
40GE interface card |
|
|
24-Port-40G Interface Card(EC1,QSFP+) |
|
|
12-Port-40G Interface Card(EF,QSFP+) |
|
|
Firewall module |
|
|
Huawei CE12800 NGFW Module A CE-FWA, with HW General Security Platform Software |
|
|
GE interface card |
|
|
48-Port 10/100/1000BASE-T Interface Card(ED,RJ45) |
|
|
48-Port 100/1000BASE-X Interface Card(ED,SFP) |
|
|
Fan module |
|
|
Fan Tray Assembly |
|
Compare to Similar Items
Table 3 shows the comparison of CE12808SA-BB and CE12804SA-B0.
|
Product Code |
CE12808SA-BB |
|
|
Switching Capacity |
89/ |
45/ 258 |
|
Forwarding Rate |
34,560 |
17,280 |
|
Service Slots |
8 |
4 |
|
Switching Fabric |
4 |
2 |
|
LPU slots |
8 (slot IDs: 01 to 08) |
4 (slot IDs: 01 to 04) |
|
MPU slots |
2 (slot IDs: 09 to 10) |
2 (slot IDs: 05 to 06) |
|
CMU slots |
None (monitoring function integrated on the MPU) |
None (monitoring function integrated on the MPU) |
|
SFU slots |
4 (slot IDs: 11 to 14) |
2 (slot IDs: 07 to 08) |
|
Power slots |
8 (slot IDs: PM1 to PM8) |
4 (slot IDs: PM1 to PM4) |
|
Fan slots |
6 (slot IDs: FAN1 to FAN6) |
3 (slot IDs: FAN1 to FAN3) |
Get more information
Do you have any question about the CE12808SA-BB
Contact us now via Live Chat or [email protected].