Huawei CloudEngine 7800 Data Center Switches
Maximum Power Consumption: 431W
QoS: Traffic classification based on L2 headers, L3 protocols, L4 protocols, and 802.1p priority
Dimensions (W x D x H): 17.4 in. x 23.9 in. x 1.7 in. (442 mm x 607 mm x 43.6 mm)
IPv6: IPv6 Neighbor Discovery (ND)
Ports: 32 x 40 GE QSFP+
Reliability: LACP
Switching Capacity: 2.56 Tbit/s
Forwarding Performance: 1,440 Mpps
Multicast: IGMP, PIM-SM, PIM-DM, MSDP, and MBGP
MAC Address Table: Maximum: 288k
Programmability: OPS
VLAN: Adding access, trunk, and hybrid interfaces to VLANs
Operating Voltage: 90V AC to 290V AC
Traffic Analysis: NetStream
IP Routing: IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
ACL: Ingress: 3,750; Egress: 1,000
ARP: Maximum: 128k
Configuration and Maintenance: Console, Telnet, and SSH terminals
Security and Management: 802.1x authentication
Airflow Design: Front-to-back or back-to-front
Device Virtualization: iStack
Network Virtualization: TRILL
Network Convergence: FCoE
Weight (fully loaded): 11.2 kg (24.7 lb)
SDN: Agile Controller
ND: Maximum: 48k
IPv4 FIB: Maximum: 256k
IPv6 FIB: Maximum: 128k
Multicast FIB: Maximum: 8k
Environment Parameters: Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) Storage temperature: -40°C to 70°C (-40°F to 158°F) Relative humidity: 5% RH to 95% RH, non-condensing
Файлы: https://www.router-switch.com/huawei-ce7850-ei-b-b0a-datasheet-pdf.html
CE7850-EI-B-B0A provides 32 40GE QSFP+ optical ports (each can be split into 4 10GE ports), and can be equipped with 2 pluggable power modules and 2 pluggable fan modules.
Quick Specs
Figure 1 shows the appearance of CE7850-EI-B-B0A.
Table 1 shows the Quick Specs.
|
Product Code |
CE7850-EI-B-B0A |
|
Software Version |
V100R003C00 and later |
|
Ports |
32 x 40 GE QSFP+ ports |
|
Power supply |
600W AC |
|
Number of stack members/Stack bandwidth |
16/640G(unidirectional) |
|
Switching Capacity |
2.56 Tbit/s |
|
Forwarding Performance |
1,440 Mpps |
|
Maximum power consumption |
431 W |
|
Typical power consumption |
271 W (100% traffic load, QSFP+ high-speed copper cables on 32 ports, double power modules) |
|
Dimensions (W x D x H) |
17.4 in. x 23.9 in. x 1.7 in. (442 mm x 607 mm x 43.6 mm) |
|
Weight (fully loaded) |
11.2 kg (24.7 lb) |
Product Details
Figure 2 shows the rear (port side) panel of CE7850-EI-B-B0A.
Note:
|
_ |
40GE QSFP+ Ethernet optical ports |
Figure 3 shows the front (power supply side) panel of CE7850-EI-B-B0A.
Note:
|
_ |
Power supply slot 1 |
|
_ |
Fan slot 1 |
|
_ |
Console port |
|
_ |
Bar code label |
|
_ |
Fan slot 2 |
|
_ |
Power supply slot 2 |
|
_ |
USB port |
|
_ |
ETH management port |
The Modules
Table 2 shows the recommended elements for the CE7850-EI-B-B0A.
|
Model |
Description |
|
40GE QSFP+ optical transceiver |
|
|
40GBase-iSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.15km,MPO)(Connect to four SFP+ Optical Transceiver) |
|
|
40GBase-LR4 Optical Transceiver,QSFP+,40GE,Single-mode Module(1310nm,10km,LC) |
|
|
FAN-40HA |
|
|
Fan box(HA,Front to Back,FAN panel side intake) |
|
|
Fan box(HA,Back to Front,FAN panel side exhaust) |
|
Compare to Similar Items
Table 3 shows the comparison of CE7850-EI-B-B0A and CE6850-48S4Q-EI.
|
Product Code |
CE7850-EI-B-B0A |
|
|
Fixed 10GE interfaces |
None |
48*10GE SFP+ |
|
Fixed 40GE interfaces |
32*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces |
4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces. |
|
Switching Capacity |
2.56 Tbit/s |
1.28 Tbit/s |
|
Forwarding Rate |
1,440 Mpps |
960 Mpps |
|
Maximum power consumption |
431 W |
272 W |
|
Typical power consumption |
271 W |
180 W |
Get more information
Do you have any question about the CE7850-EI-B-B0A?
Contact us now via Live Chat or [email protected].