Huawei S6700 Enterprise Switches
Relative humidity: 5% to 95% (non-condensing)
Security: Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC MAC Forced Forwarding (MFF) Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1X authentication and limit on the number of users on a port AAA authentication, RADIUS authentication, and HWTACACS authentication NAC SSH V2.0 HTTPS CPU protection Blacklist and whitelist Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets IPSec for management packet encryption ECA Deception
Dimensions (W x D x H): 442 mm x 420 mm x 43.6 mm
Input voltage: • AC Power - Rated AC voltage: 100V to 240V AC; 50/60 Hz - Max. AC voltage: 90V to 290V AC; 45–65 Hz • DC Power - Rated DC voltage: –48V_–60V - Max. DC voltage_-38.4V DC_-72V DC
Input current: AC 600W_Max 8A DC 1000W_Max 30A
Operating temperature: • 0–1800 m altitude: -5°C to 45°C • 1800–5000 m altitude: The operating temperature reduces by 1°C every time the altitude increases by 220 m.
Fans: 4, Fan modules are pluggable
Reliability: LACP E-Trunk Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag) ITU-Y.1731 DLDP LLDP BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static routes
Storage temperature: -40_-70_
Operating altitude: 5000 m
Multicast: IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP Multicast VPN
Interoperability: VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST Link-type Negotiation Protocol (LNP), similar to DTP VLAN Central Management Protocol (VCMP), similar to VTP
MPLS: MPLS L3VPN MPLS L2VPN (VPWS/VPLS) MPLS-TE MPLS QoS
VLAN: 4K VLANs Guest VLANs and voice VLANs GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports VLAN mapping
Management and maintenance: Cloud-based management Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different severities GVRP MUX VLAN NetStream Telemetry
Maximum power consumption: 231W
Heat dissipation: Heat dissipation with fan, intelligent fan speed adjustment
IPv6 features: Neighbor Discover (ND) PMTU IPv6 Ping, IPv6 Tracert, IPv6 Telnet ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types Multicast Listener Discovery snooping (MLDv1/v2) IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN
IP routing: Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy Up to 256K FIBv4 entries Up to 80K FIBv6 entries
QoS/ACL: Rate limiting in the inbound and outbound directions of a port Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port DRR, SP, and DRR+SP queue scheduling algorithms WRED Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP source/destination port number, protocol type, and VLAN ID Queue-based rate limiting and shaping on ports
iPCA: Marking service packets to obtain the packet loss ratio and number of lost packets in real time Measurement of the number of lost packets and packet loss ratio on networks and devices
VXLAN: VXLAN functions, VXLAN L2 and L3 gateways, BGP EVPN VXLAN configuration using NETCONF/YANG
Power supply type: 600W AC Power 1000W DC Power
Ethernet loop protection: RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection
Wireless service: AP access control, AP domain management, and AP configuration template management Radio management, unified static configuration, and dynamic centralized management WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis
SVF: Acting as the parent node to vertically virtualize downlink switches and APs as one device for management Two-layer client architecture ASs can be independently configured. Services not supported by templates can be configured on the parent node. Third-party devices allowed between SVF parent and clients
Fixed ports: 24 x 10 Gig SFP+, 6 x 40/100 Gig QSFP28
Chassis height(U): 1U
Minimum power consumption: 97W
Noise (sound pressure at normal temperature): 65dB(A)
Surge protection specification: AC power interface: differential mode: ±6kV: common mode: ±6kV DC power interface: differential mode: ±2kV: common mode: ±4kV
MAC: Up to 384K MAC address entries IEEE 802.1d standards compliance MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses
ARP: Static ARP Dynamic ARP
Старая цена: 8560
Файлы: https://www.router-switch.com/huawei-s6730-h24-6c-datasheet-pdf.html
Huawei CloudEngine S6730-H series full-featured 10 GE switches are Huawei's new-generation fixed switches, to provide 10 GE downlink ports as well as 100 GE uplink ports.
Quick Specs
Figure 1 shows the appearance of Huawei S6730-H24X6C switch.
Table 1 shows the Quick Specs.
|
Product Code |
S6730-H24X6C |
|
Fixed ports |
24 x 10 Gig SFP+, 6 x 40/100 Gig QSFP28 |
|
Dimensions (W x D x H) |
442 mm x 420 mm x 43.6 mm |
|
Chassis height(U) |
1U |
|
Input voltage |
• AC Power - Rated AC voltage: 100V to 240V AC; 50/60 Hz - Max. AC voltage: 90V to 290V AC; 45–65 Hz • DC Power - Rated DC voltage: –48V_–60V - Max. DC voltage_-38.4V DC_-72V DC |
|
Input current |
AC 600W_Max 8A DC 1000W_Max 30A |
|
Maximum power consumption |
231W |
|
Minimum power consumption |
97W |
Product Details
Figure 2 shows the front panel of Huawei S6730-H24X6C switch.
Note:
|
_ |
Twenty-four 10GE SFP+ ports |
_ |
Six 40GE/100GE QSFP28 optical ports |
Figure 3 shows the back panel of Huawei S6730-H24X6C switch.
Note:
|
_ |
Ground screw |
_ |
Fan module slot 1 |
|
_ |
SSD card slot |
_ |
Fan module slot 2 |
|
_ |
One console port |
_ |
Fan module slot 3 |
|
_ |
One ETH management port |
_ |
Fan module slot 4 |
|
_ |
One USB port |
_ |
Power module slot 1 |
|
_ |
One PNP button |
_ |
Power module slot 2 |
The Modules
Table 2 shows the recommended products.
|
Model |
Description |
|
Optical Transceiver,eSFP,GE,Single-mode Module(1550nm,100km,LC) |
|
|
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1310/RX1490,10km,LC) |
|
|
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1490/RX1310,10km,LC) |
|
|
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1310/RX1490,40km,LC) |
|
|
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1490/RX1310,40km,LC) |
|
|
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(1570nm(Tx)/1490nm(Rx),80km,LC) |
|
|
Optical Transceiver,eSFP,GE,BiDi Single-mode Module(1490nm(Tx)/1570nm(Rx),80km,LC) |
|
|
1000Base,BIDI Optical Transceiver,SFP,GE,Single-mode Module(TX1490nm/RX1310nm,10km,SC) |
|
|
CWDM Optical Transceiver,eSFP,2.5G,Single-mode Module(1471nm,80km,LC) |
|
|
CWDM Optical Transceiver,eSFP,2.5G,Single-mode Module(1491nm,80km,LC) |
|
|
DWDM Optical Transceiver,eSFP,2.5G,Single-mode Module(1560.61nm,120km,LC) |
|
|
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
|
10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC) |
|
|
Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC) |
|
|
Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,1.4km,LC) |
|
|
Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC) |
|
|
Optical Transceiver,SFP+,10G,Single-mode Module(1550nm,40km,LC) |
|
|
Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,40km,LC) |
|
|
10GBase-ZR Optical Transceiver,SFP+,10G,Single-mode Module(1550nm,80km,LC) |
|
|
10GBase,BIDI Optical Transceiver,SFP+,10G,Single-mode Module(TX1270nm/RX1330nm,10km,LC) |
Compare to Similar Items
Table 3 shows the comparison.
|
Product Code |
S6730-H24X6C |
|
|
Fixed ports |
24 x 10 Gig SFP+, 6 x 40/100 Gig QSFP28 |
48 x 10 Gig SFP+, 6 x 40/100 Gig QSFP28 |
|
Dimensions (W x D x H) |
442 mm x 420 mm x 43.6 mm |
442 mm x 420 mm x 43.6 mm |
|
Chassis height(U) |
1U |
1U |
|
Input voltage
|
• AC Power - Rated AC voltage: 100V to 240V AC; 50/60 Hz - Max. AC voltage: 90V to 290V AC; 45–65 Hz • DC Power - Rated DC voltage: –48V_–60V - Max. DC voltage_-38.4V DC_-72V DC |
• AC Power - Rated AC voltage: 100V to 240V AC; 50/60 Hz - Max. AC voltage: 90V to 290V AC; 45–65 Hz • DC Power - Rated DC voltage: –48V_–60V - Max. DC voltage_-38.4V DC_-72V DC |
|
Input current |
AC 600W_Max 8A DC 1000W_Max 30A |
AC 600W_Max 8A DC 1000W_Max 30A |
|
Maximum power consumption |
231W |
274W |
|
Minimum power consumption |
97W |
97W |
Get More Information
Do you have any question about the S6730-H24X6C ?
Contact us now via Live Chat or [email protected].